JDK8/Java8源码在线阅读

/*
 * Copyright (c) 1998, 2013, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package javax.sound.midi;

/**
 * A <code>SysexMessage</code> object represents a MIDI system exclusive message.
 * <p>
 * When a system exclusive message is read from a MIDI file, it always has
 * a defined length.  Data from a system exclusive message from a MIDI file
 * should be stored in the data array of a <code>SysexMessage</code> as
 * follows: the system exclusive message status byte (0xF0 or 0xF7), all
 * message data bytes, and finally the end-of-exclusive flag (0xF7).
 * The length reported by the <code>SysexMessage</code> object is therefore
 * the length of the system exclusive data plus two: one byte for the status
 * byte and one for the end-of-exclusive flag.
 * <p>
 * As dictated by the Standard MIDI Files specification, two status byte values are legal
 * for a <code>SysexMessage</code> read from a MIDI file:
 * <ul>
 * <li>0xF0: System Exclusive message (same as in MIDI wire protocol)</li>
 * <li>0xF7: Special System Exclusive message</li>
 * </ul>
 * <p>
 * When Java Sound is used to handle system exclusive data that is being received
 * using MIDI wire protocol, it should place the data in one or more
 * <code>SysexMessages</code>.  In this case, the length of the system exclusive data
 * is not known in advance; the end of the system exclusive data is marked by an
 * end-of-exclusive flag (0xF7) in the MIDI wire byte stream.
 * <ul>
 * <li>0xF0: System Exclusive message (same as in MIDI wire protocol)</li>
 * <li>0xF7: End of Exclusive (EOX)</li>
 * </ul>
 * The first <code>SysexMessage</code> object containing data for a particular system
 * exclusive message should have the status value 0xF0.  If this message contains all
 * the system exclusive data
 * for the message, it should end with the status byte 0xF7 (EOX).
 * Otherwise, additional system exclusive data should be sent in one or more
 * <code>SysexMessages</code> with a status value of 0xF7.  The <code>SysexMessage</code>
 * containing the last of the data for the system exclusive message should end with the
 * value 0xF7 (EOX) to mark the end of the system exclusive message.
 * <p>
 * If system exclusive data from <code>SysexMessages</code> objects is being transmitted
 * using MIDI wire protocol, only the initial 0xF0 status byte, the system exclusive
 * data itself, and the final 0xF7 (EOX) byte should be propagated; any 0xF7 status
 * bytes used to indicate that a <code>SysexMessage</code> contains continuing system
 * exclusive data should not be propagated via MIDI wire protocol.
 *
 * @author David Rivas
 * @author Kara Kytle
 * @author Florian Bomers
 */
public class SysexMessage extends MidiMessage {


    // Status byte defines


    /**
     * Status byte for System Exclusive message (0xF0, or 240).
     * @see MidiMessage#getStatus
     */
    public static final int SYSTEM_EXCLUSIVE                    = 0xF0; // 240


    /**
     * Status byte for Special System Exclusive message (0xF7, or 247), which is used
     * in MIDI files.  It has the same value as END_OF_EXCLUSIVE, which
     * is used in the real-time "MIDI wire" protocol.
     * @see MidiMessage#getStatus
     */
    public static final int SPECIAL_SYSTEM_EXCLUSIVE    = 0xF7; // 247


    // Instance variables


    /*
     * The data bytes for this system exclusive message.  These are
     * initialized to <code>null</code> and are set explicitly
     * by {@link #setMessage(int, byte[], int, long) setMessage}.
     */
    //protected byte[] data = null;


    /**
     * Constructs a new <code>SysexMessage</code>. The
     * contents of the new message are guaranteed to specify
     * a valid MIDI message.  Subsequently, you may set the
     * contents of the message using one of the <code>setMessage</code>
     * methods.
     * @see #setMessage
     */
    public SysexMessage() {
        this(new byte[2]);
        // Default sysex message data: SOX followed by EOX
        data[0] = (byte) (SYSTEM_EXCLUSIVE & 0xFF);
        data[1] = (byte) (ShortMessage.END_OF_EXCLUSIVE & 0xFF);
    }

    /**
     * Constructs a new {@code SysexMessage} and sets the data for
     * the message. The first byte of the data array must be a valid system
     * exclusive status byte (0xF0 or 0xF7).
     * The contents of the message can be changed by using one of
     * the {@code setMessage} methods.
     *
     * @param data the system exclusive message data including the status byte
     * @param length the length of the valid message data in the array,
     *     including the status byte; it should be non-negative and less than
     *     or equal to {@code data.length}
     * @throws InvalidMidiDataException if the parameter values
     *     do not specify a valid MIDI meta message.
     * @see #setMessage(byte[], int)
     * @see #setMessage(int, byte[], int)
     * @see #getData()
     * @since 1.7
     */
    public SysexMessage(byte[] data, int length)
            throws InvalidMidiDataException {
        super(null);
        setMessage(data, length);
    }

    /**
     * Constructs a new {@code SysexMessage} and sets the data for the message.
     * The contents of the message can be changed by using one of
     * the {@code setMessage} methods.
     *
     * @param status the status byte for the message; it must be a valid system
     *     exclusive status byte (0xF0 or 0xF7)
     * @param data the system exclusive message data (without the status byte)
     * @param length the length of the valid message data in the array;
     *     it should be non-negative and less than or equal to
     *     {@code data.length}
     * @throws InvalidMidiDataException if the parameter values
     *     do not specify a valid MIDI meta message.
     * @see #setMessage(byte[], int)
     * @see #setMessage(int, byte[], int)
     * @see #getData()
     * @since 1.7
     */
    public SysexMessage(int status, byte[] data, int length)
            throws InvalidMidiDataException {
        super(null);
        setMessage(status, data, length);
    }


    /**
     * Constructs a new <code>SysexMessage</code>.
     * @param data an array of bytes containing the complete message.
     * The message data may be changed using the <code>setMessage</code>
     * method.
     * @see #setMessage
     */
    protected SysexMessage(byte[] data) {
        super(data);
    }


    /**
     * Sets the data for the system exclusive message.   The
     * first byte of the data array must be a valid system
     * exclusive status byte (0xF0 or 0xF7).
     * @param data the system exclusive message data
     * @param length the length of the valid message data in
     * the array, including the status byte.
     */
    public void setMessage(byte[] data, int length) throws InvalidMidiDataException {
        int status = (data[0] & 0xFF);
        if ((status != 0xF0) && (status != 0xF7)) {
            throw new InvalidMidiDataException("Invalid status byte for sysex message: 0x" + Integer.toHexString(status));
        }
        super.setMessage(data, length);
    }


    /**
     * Sets the data for the system exclusive message.
     * @param status the status byte for the message (0xF0 or 0xF7)
     * @param data the system exclusive message data
     * @param length the length of the valid message data in
     * the array
     * @throws InvalidMidiDataException if the status byte is invalid for a sysex message
     */
    public void setMessage(int status, byte[] data, int length) throws InvalidMidiDataException {
        if ( (status != 0xF0) && (status != 0xF7) ) {
            throw new InvalidMidiDataException("Invalid status byte for sysex message: 0x" + Integer.toHexString(status));
        }
        if (length < 0 || length > data.length) {
            throw new IndexOutOfBoundsException("length out of bounds: "+length);
        }
        this.length = length + 1;


/**代码未完, 请加载全部代码(NowJava.com).**/