JDK8/Java8源码在线阅读

JDK8/Java8源码在线阅读 / java / io / PipedInputStream.java
/*
 * Copyright (c) 1995, 2013, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

package java.io;

/**
 * A piped input stream should be connected
 * to a piped output stream; the piped  input
 * stream then provides whatever data bytes
 * are written to the piped output  stream.
 * Typically, data is read from a <code>PipedInputStream</code>
 * object by one thread  and data is written
 * to the corresponding <code>PipedOutputStream</code>
 * by some  other thread. Attempting to use
 * both objects from a single thread is not
 * recommended, as it may deadlock the thread.
 * The piped input stream contains a buffer,
 * decoupling read operations from write operations,
 * within limits.
 * A pipe is said to be <a name="BROKEN"> <i>broken</i> </a> if a
 * thread that was providing data bytes to the connected
 * piped output stream is no longer alive.
 *
 * @author  James Gosling
 * @see     java.io.PipedOutputStream
 * @since   JDK1.0
 */
public class PipedInputStream extends InputStream {
    boolean closedByWriter = false;
    volatile boolean closedByReader = false;
    boolean connected = false;

        /* REMIND: identification of the read and write sides needs to be
           more sophisticated.  Either using thread groups (but what about
           pipes within a thread?) or using finalization (but it may be a
           long time until the next GC). */
    Thread readSide;
    Thread writeSide;

    private static final int DEFAULT_PIPE_SIZE = 1024;

    /**
     * The default size of the pipe's circular input buffer.
     * @since   JDK1.1
     */
    // This used to be a constant before the pipe size was allowed
    // to change. This field will continue to be maintained
    // for backward compatibility.
    protected static final int PIPE_SIZE = DEFAULT_PIPE_SIZE;

    /**
     * The circular buffer into which incoming data is placed.
     * @since   JDK1.1
     */
    protected byte buffer[];

    /**
     * The index of the position in the circular buffer at which the
     * next byte of data will be stored when received from the connected
     * piped output stream. <code>in&lt;0</code> implies the buffer is empty,
     * <code>in==out</code> implies the buffer is full
     * @since   JDK1.1
     */
    protected int in = -1;

    /**
     * The index of the position in the circular buffer at which the next
     * byte of data will be read by this piped input stream.
     * @since   JDK1.1
     */
    protected int out = 0;

    /**
     * Creates a <code>PipedInputStream</code> so
     * that it is connected to the piped output
     * stream <code>src</code>. Data bytes written
     * to <code>src</code> will then be  available
     * as input from this stream.
     *
     * @param      src   the stream to connect to.
     * @exception  IOException  if an I/O error occurs.
     */
    public PipedInputStream(PipedOutputStream src) throws IOException {
        this(src, DEFAULT_PIPE_SIZE);
    }

    /**
     * Creates a <code>PipedInputStream</code> so that it is
     * connected to the piped output stream
     * <code>src</code> and uses the specified pipe size for
     * the pipe's buffer.
     * Data bytes written to <code>src</code> will then
     * be available as input from this stream.
     *
     * @param      src   the stream to connect to.
     * @param      pipeSize the size of the pipe's buffer.
     * @exception  IOException  if an I/O error occurs.
     * @exception  IllegalArgumentException if {@code pipeSize <= 0}.
     * @since      1.6
     */
    public PipedInputStream(PipedOutputStream src, int pipeSize)
            throws IOException {
         initPipe(pipeSize);
         connect(src);
    }

    /**
     * Creates a <code>PipedInputStream</code> so
     * that it is not yet {@linkplain #connect(java.io.PipedOutputStream)
     * connected}.
     * It must be {@linkplain java.io.PipedOutputStream#connect(
     * java.io.PipedInputStream) connected} to a
     * <code>PipedOutputStream</code> before being used.
     */
    public PipedInputStream() {
        initPipe(DEFAULT_PIPE_SIZE);
    }

    /**
     * Creates a <code>PipedInputStream</code> so that it is not yet
     * {@linkplain #connect(java.io.PipedOutputStream) connected} and
     * uses the specified pipe size for the pipe's buffer.
     * It must be {@linkplain java.io.PipedOutputStream#connect(
     * java.io.PipedInputStream)
     * connected} to a <code>PipedOutputStream</code> before being used.
     *
     * @param      pipeSize the size of the pipe's buffer.
     * @exception  IllegalArgumentException if {@code pipeSize <= 0}.
     * @since      1.6
     */
    public PipedInputStream(int pipeSize) {
        initPipe(pipeSize);
    }

    private void initPipe(int pipeSize) {
         if (pipeSize <= 0) {
            throw new IllegalArgumentException("Pipe Size <= 0");
         }
         buffer = new byte[pipeSize];
    }

    /**
     * Causes this piped input stream to be connected
     * to the piped  output stream <code>src</code>.
     * If this object is already connected to some
     * other piped output  stream, an <code>IOException</code>
     * is thrown.
     * <p>
     * If <code>src</code> is an
     * unconnected piped output stream and <code>snk</code>
     * is an unconnected piped input stream, they
     * may be connected by either the call:
     *
     * <pre><code>snk.connect(src)</code> </pre>
     * <p>
     * or the call:
     *
     * <pre><code>src.connect(snk)</code> </pre>
     * <p>
     * The two calls have the same effect.
     *
     * @param      src   The piped output stream to connect to.
     * @exception  IOException  if an I/O error occurs.
     */
    public void connect(PipedOutputStream src) throws IOException {
        src.connect(this);
    }

    /**
     * Receives a byte of data.  This method will block if no input is
     * available.
     * @param b the byte being received
     * @exception IOException If the pipe is <a href="#BROKEN"> <code>broken</code></a>,
     *          {@link #connect(java.io.PipedOutputStream) unconnected},
     *          closed, or if an I/O error occurs.
     * @since     JDK1.1
     */
    protected synchronized void receive(int b) throws IOException {
        checkStateForReceive();
        writeSide = Thread.currentThread();
        if (in == out)
            awaitSpace();
        if (in < 0) {
            in = 0;
            out = 0;
        }
        buffer[in++] = (byte)(b & 0xFF);
        if (in >= buffer.length) {
            in = 0;
        }
    }

    /**
     * Receives data into an array of bytes.  This method will
     * block until some input is available.
     * @param b the buffer into which the data is received
     * @param off the start offset of the data
     * @param len the maximum number of bytes received
     * @exception IOException If the pipe is <a href="#BROKEN"> broken</a>,
     *           {@link #connect(java.io.PipedOutputStream) unconnected},
     *           closed,or if an I/O error occurs.
     */
    synchronized void receive(byte b[], int off, int len)  throws IOException {
        checkStateForReceive();
        writeSide = Thread.currentThread();
        int bytesToTransfer = len;
        while (bytesToTransfer > 0) {
            if (in == out)
                awaitSpace();
            int nextTransferAmount = 0;
            if (out < in) {
                nextTransferAmount = buffer.length - in;
            } else if (in < out) {
                if (in == -1) {
                    in = out = 0;
                    nextTransferAmount = buffer.length - in;
                } else {
                    nextTransferAmount = out - in;
                }
            }
            if (nextTransferAmount > bytesToTransfer)
                nextTransferAmount = bytesToTransfer;
            assert(nextTransferAmount > 0);
            System.arraycopy(b, off, buffer, in, nextTransferAmount);
            bytesToTransfer -= nextTransferAmount;
            off += nextTransferAmount;
            in += nextTransferAmount;
            if (in >= buffer.length) {
                in = 0;
            }
        }
    }

    private void checkStateForReceive() throws IOException {
        if (!connected) {
            throw new IOException("Pipe not connected");
        } else if (closedByWriter || closedByReader) {
            throw new IOException("Pipe closed");
        } else if (readSide != null && !readSide.isAlive()) {
            throw new IOException("Read end dead");
        }
    }

    private void awaitSpace() throws IOException {
        while (in == out) {
            checkStateForReceive();

            /* full: kick any waiting readers */
            notifyAll();
            try {
                wait(1000);
            } catch (InterruptedException ex) {
                throw new java.io.InterruptedIOException();
            }
        }
    }

    /**
     * Notifies all waiting threads that the last byte of data has been
     * received.
     */
    synchronized void receivedLast() {
        closedByWriter = true;
        notifyAll();
    }

    /**
     * Reads the next byte of data from this piped input stream. The
     * value byte is returned as an <code>int</code> in the range
     * <code>0</code> to <code>255</code>.
     * This method blocks until input data is available, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if the pipe is
     *           {@link #connect(java.io.PipedOutputStream) unconnected},
     *           <a href="#BROKEN"> <code>broken</code></a>, closed,
     *           or if an I/O error occurs.
     */
    public synchronized int read()  throws IOException {
        if (!connected) {
            throw new IOException("Pipe not connected");
        } else if (closedByReader) {
            throw new IOException("Pipe closed");
        } else if (writeSide != null && !writeSide.isAlive()
                   && !closedByWriter && (in < 0)) {
            throw new IOException("Write end dead");
        }

        readSide = Thread.currentThread();
        int trials = 2;
        while (in < 0) {
            if (closedByWriter) {
                /* closed by writer, return EOF */
                return -1;
            }
            if ((writeSide != null) && (!writeSide.isAlive()) && (--trials < 0)) {
                throw new IOException("Pipe broken");
            }
            /* might be a writer waiting */
            notifyAll();
            try {
                wait(1000);
            } catch (InterruptedException ex) {
                throw new java.io.InterruptedIOException();
            }
        }
        int ret = buffer[out++] & 0xFF;
        if (out >= buffer.length) {
            out = 0;
        }
        if (in == out) {
            /* now empty */
            in = -1;
        }

        return ret;
    }

    /**
     * Reads up to <code>len</code> bytes of data from this piped input
     * stream into an array of bytes. Less than <code>len</code> bytes
     * will be read if the end of the data stream is reached or if
     * <code>len</code> exceeds the pipe's buffer size.
     * If <code>len </code> is zero, then no bytes are read and 0 is returned;
     * otherwise, the method blocks until at least 1 byte of input is
     * available, end of the stream has been detected, or an exception is
     * thrown.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset in the destination array <code>b</code>
     * @param      len   the maximum number of bytes read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  NullPointerException If <code>b</code> is <code>null</code>.
     * @exception  IndexOutOfBoundsException If <code>off</code> is negative,
     * <code>len</code> is negative, or <code>len</code> is greater than
     * <code>b.length - off</code>
     * @exception  IOException if the pipe is <a href="#BROKEN"> <code>broken</code></a>,
     *           {@link #connect(java.io.PipedOutputStream) unconnected},
     *           closed, or if an I/O error occurs.
     */
    public synchronized int read(byte b[], int off, int len)  throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if (off < 0 || len < 0 || len > b.length - off) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return 0;
        }

        /* possibly wait on the first character */
        int c = read();
        if (c < 0) {
            return -1;
        }
        b[off] = (byte) c;
        int rlen = 1;
        while ((in >= 0) && (len > 1)) {

            int available;

            if (in > out) {
                available = Math.min((buffer.length - out), (in - out));
            } else {
                available = buffer.length - out;
            }

            // A byte is read beforehand outside the loop
            if (available > (len - 1)) {

/**代码未完, 请加载全部代码(NowJava.com).**/
展开阅读全文

关注时代Java

关注时代Java