JDK14/Java14源码在线阅读
JDK14/Java14源码在线阅读 /
java.management /
share /
classes /
javax /
management /
monitor /
package.html
<html>
<head>
<title>javax.management.monitor package</title>
<!--
Copyright (c) 1999, 2017, Oracle and/or its affiliates. All rights reserved.
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
This code is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License version 2 only, as
published by the Free Software Foundation. Oracle designates this
particular file as subject to the "Classpath" exception as provided
by Oracle in the LICENSE file that accompanied this code.
This code is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
version 2 for more details (a copy is included in the LICENSE file that
accompanied this code).
You should have received a copy of the GNU General Public License version
2 along with this work; if not, write to the Free Software Foundation,
Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
or visit www.oracle.com if you need additional information or have any
questions.
-->
</head>
<body bgcolor="white">
<p>Provides the definition of the monitor classes. A Monitor is
an MBean that periodically observes the value of an attribute in
one or more other MBeans. If the attribute meets a certain
condition, the Monitor emits a {@link
javax.management.monitor.MonitorNotification
MonitorNotification}. When the monitor MBean periodically calls
{@link javax.management.MBeanServer#getAttribute getAttribute}
to retrieve the value of the attribute being monitored it does
so within the access control context of the
{@link javax.management.monitor.Monitor#start} caller.</p>
<p id="complex">The value being monitored can be a simple value
contained within a complex type. For example, the {@link
java.lang.management.MemoryMXBean MemoryMXBean} defined in
{@code java.lang.management} has an attribute
{@code HeapMemoryUsage} of type {@link
java.lang.management.MemoryUsage MemoryUsage}. To monitor the
amount of <i>used</i> memory, described by the {@code used}
property of {@code MemoryUsage}, you could monitor
"{@code HeapMemoryUsage.used}". That string would be the
argument to {@link
javax.management.monitor.MonitorMBean#setObservedAttribute(String)
setObservedAttribute}.</p>
<p>The rules used to interpret an {@code ObservedAttribute} like
{@code "HeapMemoryUsage.used"} are as follows. Suppose the string is
<i>A.e</i> (so <i>A</i> would be {@code "HeapMemoryUsage"} and <i>e</i>
would be {@code "used"} in the example).</p>
<p>First the value of the attribute <i>A</i> is obtained. Call it
<i>v</i>. A value <i>x</i> is extracted from <i>v</i> as follows:</p>
<ul>
<li>If <i>v</i> is a {@link javax.management.openmbean.CompositeData
CompositeData} and if <i>v</i>.{@link
javax.management.openmbean.CompositeData#get(String) get}(<i>e</i>)
returns a value then <i>x</i> is that value.</li>
<li>If <i>v</i> is an array and <i>e</i> is the string {@code "length"}
then <i>x</i> is the length of the array.</li>
<li>If the above rules do not produce a value, and if introspection, as
if by calling {@link java.beans.Introspector#getBeanInfo(Class)
Introspector.getBeanInfo}, for the class of <i>v</i>
(<i>v</i>.{@code getClass()}) identifies a property with the name
<i>e</i>, then <i>x</i> is the result of reading the property value. </li>
</ul>
<p>The third rule means for example that if the attribute
{@code HeapMemoryUsage} is a {@code MemoryUsage}, monitoring
{@code "HeapMemoryUsage.used"} will obtain the observed value by
calling {@code MemoryUsage.getUsed()}.</p>
<p>If the {@code ObservedAttribute} contains more than one period,
for example {@code "ConnectionPool.connectionStats.length"}, then the
above rules are applied iteratively. Here, <i>v</i> would initially be
the value of the attribute {@code ConnectionPool}, and <i>x</i> would
be derived by applying the above rules with <i>e</i> equal to
{@code "connectionStats"}. Then <i>v</i> would be set to this <i>x</i>
and a new <i>x</i> derived by applying the rules again with <i>e</i>
equal to {@code "length"}.</p>
<p>Although it is recommended that attribute names be valid Java
identifiers, it is possible for an attribute to be called
{@code HeapMemoryUsage.used}. This means that an
{@code ObservedAttribute} that is {@code HeapMemoryUsage.used}
could mean that the value to observe is either an attribute of that
name, or the property {@code used} within an attribute called
{@code HeapMemoryUsage}. So for compatibility reasons, when the
{@code ObservedAttribute} contains a period ({@code .}), the monitor
will check whether an attribute exists whose name is the full
{@code ObservedAttribute} string ({@code HeapMemoryUsage.used} in the
example). It does this by calling {@link
javax.management.MBeanServer#getMBeanInfo(javax.management.ObjectName)
getMBeanInfo} for the observed MBean and looking for a contained {@link
javax.management.MBeanAttributeInfo MBeanAttributeInfo} with the given
name. If one is found, then that is what is monitored. If more than one
MBean is being observed, the behavior is unspecified if some of them have
a {@code HeapMemoryUsage.used} attribute and others do not. An
implementation may therefore call {@code getMBeanInfo} on just one of
the MBeans in this case. The behavior is also unspecified if the result
of the check changes while the monitor is active.</p>
<p>The exact behavior of monitors is detailed in the
<a href="#spec">JMX Specification</a>. What follows is a
summary.</p>
<p>There are three kinds of Monitors:</p>
<ul>
<li>
<p>A {@link javax.management.monitor.CounterMonitor
CounterMonitor} observes attributes of integer
type. The attributes are assumed to be non-negative, and
monotonically increasing except for a possible
<em>roll-over</em> at a specified <em>modulus</em>. Each
observed attribute has an associated <em>threshold</em>
value. A notification is sent when the attribute exceeds
its threshold.</p>
<p>An <em>offset</em> value can be specified. When an
observed value exceeds its threshold, the threshold is
incremented by the offset, or by a multiple of the offset
sufficient to make the threshold greater than the new
observed value.</p>
<p>A <code>CounterMonitor</code> can operate in
<em>difference mode</em>. In this mode, the value
compared against the threshold is the difference between
two successive observations of an attribute.</p>
</li>
<li>
<p>A {@link javax.management.monitor.GaugeMonitor
GaugeMonitor} observes attributes of numerical type. Each
observed attribute has an associated <em>high
threshold</em> and <em>low threshold</em>.</p>
<p>When an observed attribute crosses the high threshold, if
the <em>notify high</em> flag is true, then a notification
is sent. Subsequent crossings of the high threshold value
will not trigger further notifications until the gauge value
becomes less than or equal to the low threshold.</p>
<p>When an observed attribute crosses the low threshold, if
the <em>notify low</em> flag is true, then a notification
is sent. Subsequent crossings of the low threshold value
will not trigger further notifications until the gauge
value becomes greater than or equal to the high
threshold.</p>
<p>Typically, only one of the notify high and notify low
/**代码未完, 请加载全部代码(NowJava.com).**/
关注时代Java
关注时代Java