/****************************************************************************
*
* ftmoderr.h
*
* FreeType module error offsets (specification).
*
* Copyright (C) 2001-2019 by
* David Turner, Robert Wilhelm, and Werner Lemberg.
*
* This file is part of the FreeType project, and may only be used,
* modified, and distributed under the terms of the FreeType project
* license, LICENSE.TXT. By continuing to use, modify, or distribute
* this file you indicate that you have read the license and
* understand and accept it fully.
*
*/
/**************************************************************************
*
* This file is used to define the FreeType module error codes.
*
* If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is
* set, the lower byte of an error value identifies the error code as
* usual. In addition, the higher byte identifies the module. For
* example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the
* error `TT_Err_Invalid_File_Format` has value 0x1303, the error
* `T1_Err_Invalid_File_Format` has value 0x1403, etc.
*
* Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero,
* including the high byte.
*
* If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an
* error value is set to zero.
*
* To hide the various `XXX_Err_` prefixes in the source code, FreeType
* provides some macros in `fttypes.h`.
*
* FT_ERR( err )
*
* Add current error module prefix (as defined with the `FT_ERR_PREFIX`
* macro) to `err`. For example, in the BDF module the line
*
* ```
* error = FT_ERR( Invalid_Outline );
* ```
*
* expands to
*
* ```
* error = BDF_Err_Invalid_Outline;
* ```
*
* For simplicity, you can always use `FT_Err_Ok` directly instead of
* `FT_ERR( Ok )`.
*
* FT_ERR_EQ( errcode, err )
* FT_ERR_NEQ( errcode, err )
*
* Compare error code `errcode` with the error `err` for equality and
* inequality, respectively. Example:
*
* ```
* if ( FT_ERR_EQ( error, Invalid_Outline ) )
* ...
* ```
*
* Using this macro you don't have to think about error prefixes. Of
* course, if module errors are not active, the above example is the
* same as
*
* ```
* if ( error == FT_Err_Invalid_Outline )
* ...
* ```
*
* FT_ERROR_BASE( errcode )
* FT_ERROR_MODULE( errcode )
*
* Get base error and module error code, respectively.
*
* It can also be used to create a module error message table easily with
* something like
*
* ```
* #undef FTMODERR_H_
* #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s },
* #define FT_MODERR_START_LIST {
* #define FT_MODERR_END_LIST { 0, 0 } };
*
* const struct
* {
* int mod_err_offset;
* const char* mod_err_msg
* } ft_mod_errors[] =
*
* #include FT_MODULE_ERRORS_H
* ```
*
*/
#ifndef FTMODERR_H_
#define FTMODERR_H_
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** SETUP MACROS *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#undef FT_NEED_EXTERN_C
#ifndef FT_MODERRDEF
#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v,
#else
#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0,
#endif
#define FT_MODERR_START_LIST enum {
#define FT_MODERR_END_LIST FT_Mod_Err_Max };
#ifdef __cplusplus
#define FT_NEED_EXTERN_C
extern "C" {
#endif
#endif /* !FT_MODERRDEF */
/*******************************************************************/
/*******************************************************************/
/***** *****/
/***** LIST MODULE ERROR BASES *****/
/***** *****/
/*******************************************************************/
/*******************************************************************/
#ifdef FT_MODERR_START_LIST
FT_MODERR_START_LIST
#endif
FT_MODERRDEF( Base, 0x000, "base module" )
FT_MODERRDEF( Autofit, 0x100, "autofitter module" )
FT_MODERRDEF( BDF, 0x200, "BDF module" )
FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" )
FT_MODERRDEF( Cache, 0x400, "cache module" )
FT_MODERRDEF( CFF, 0x500, "CFF module" )
FT_MODERRDEF( CID, 0x600, "CID module" )
FT_MODERRDEF( Gzip, 0x700, "Gzip module" )
FT_MODERRDEF( LZW, 0x800, "LZW module" )
FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" )
FT_MODERRDEF( PCF, 0xA00, "PCF module" )
FT_MODERRDEF( PFR, 0xB00, "PFR module" )
FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" )
FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" )
FT_MODERRDEF( PSnames, 0xE00, "PS names module" )
FT_MODERRDEF( Raster, 0xF00, "raster module" )
FT_MODERRDEF( SFNT, 0x1000, "SFNT module" )
FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" )
FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
FT_MODERRDEF( Type1, 0x1300, "Type 1 module" )
FT_MODERRDEF( Type42, 0x1400, "Type 42 module" )
FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" )
#ifdef FT_MODERR_END_LIST
FT_MODERR_END_LIST
#endif
/**代码未完, 请加载全部代码(NowJava.com).**/