JDK14/Java14源码在线阅读
/*
* Copyright (c) 2007, 2018, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
package sun.java2d.marlin;
import java.util.Arrays;
import sun.awt.geom.PathConsumer2D;
import sun.java2d.marlin.stats.Histogram;
import sun.java2d.marlin.stats.StatLong;
final class Helpers implements MarlinConst {
private Helpers() {
throw new Error("This is a non instantiable class");
}
static boolean within(final float x, final float y, final float err) {
final float d = y - x;
return (d <= err && d >= -err);
}
static boolean within(final double x, final double y, final double err) {
final double d = y - x;
return (d <= err && d >= -err);
}
static float evalCubic(final float a, final float b,
final float c, final float d,
final float t)
{
return t * (t * (t * a + b) + c) + d;
}
static float evalQuad(final float a, final float b,
final float c, final float t)
{
return t * (t * a + b) + c;
}
static int quadraticRoots(final float a, final float b, final float c,
final float[] zeroes, final int off)
{
int ret = off;
if (a != 0.0f) {
final float dis = b*b - 4.0f * a * c;
if (dis > 0.0f) {
final float sqrtDis = (float) Math.sqrt(dis);
// depending on the sign of b we use a slightly different
// algorithm than the traditional one to find one of the roots
// so we can avoid adding numbers of different signs (which
// might result in loss of precision).
if (b >= 0.0f) {
zeroes[ret++] = (2.0f * c) / (-b - sqrtDis);
zeroes[ret++] = (-b - sqrtDis) / (2.0f * a);
} else {
zeroes[ret++] = (-b + sqrtDis) / (2.0f * a);
zeroes[ret++] = (2.0f * c) / (-b + sqrtDis);
}
} else if (dis == 0.0f) {
zeroes[ret++] = -b / (2.0f * a);
}
} else if (b != 0.0f) {
zeroes[ret++] = -c / b;
}
return ret - off;
}
// find the roots of g(t) = d*t^3 + a*t^2 + b*t + c in [A,B)
static int cubicRootsInAB(final float d0, float a0, float b0, float c0,
final float[] pts, final int off,
final float A, final float B)
{
if (d0 == 0.0f) {
final int num = quadraticRoots(a0, b0, c0, pts, off);
return filterOutNotInAB(pts, off, num, A, B) - off;
}
// From Graphics Gems:
// https://github.com/erich666/GraphicsGems/blob/master/gems/Roots3And4.c
// (also from awt.geom.CubicCurve2D. But here we don't need as
// much accuracy and we don't want to create arrays so we use
// our own customized version).
// normal form: x^3 + ax^2 + bx + c = 0
// 2018.1: Need double precision if d is very small (flat curve) !
/*
* TODO: cleanup all that code after reading Roots3And4.c
*/
final double a = ((double)a0) / d0;
final double b = ((double)b0) / d0;
final double c = ((double)c0) / d0;
// substitute x = y - A/3 to eliminate quadratic term:
// x^3 +Px + Q = 0
//
// Since we actually need P/3 and Q/2 for all of the
// calculations that follow, we will calculate
// p = P/3
// q = Q/2
// instead and use those values for simplicity of the code.
final double sub = (1.0d / 3.0d) * a;
final double sq_A = a * a;
final double p = (1.0d / 3.0d) * ((-1.0d / 3.0d) * sq_A + b);
final double q = (1.0d / 2.0d) * ((2.0d / 27.0d) * a * sq_A - sub * b + c);
// use Cardano's formula
final double cb_p = p * p * p;
final double D = q * q + cb_p;
int num;
if (D < 0.0d) {
// see: http://en.wikipedia.org/wiki/Cubic_function#Trigonometric_.28and_hyperbolic.29_method
final double phi = (1.0d / 3.0d) * Math.acos(-q / Math.sqrt(-cb_p));
final double t = 2.0d * Math.sqrt(-p);
pts[off ] = (float) ( t * Math.cos(phi) - sub);
pts[off + 1] = (float) (-t * Math.cos(phi + (Math.PI / 3.0d)) - sub);
pts[off + 2] = (float) (-t * Math.cos(phi - (Math.PI / 3.0d)) - sub);
num = 3;
} else {
final double sqrt_D = Math.sqrt(D);
final double u = Math.cbrt(sqrt_D - q);
final double v = - Math.cbrt(sqrt_D + q);
pts[off ] = (float) (u + v - sub);
num = 1;
if (within(D, 0.0d, 1e-8d)) {
pts[off + 1] = (float)((-1.0d / 2.0d) * (u + v) - sub);
num = 2;
}
}
return filterOutNotInAB(pts, off, num, A, B) - off;
}
// returns the index 1 past the last valid element remaining after filtering
static int filterOutNotInAB(final float[] nums, final int off, final int len,
final float a, final float b)
{
int ret = off;
for (int i = off, end = off + len; i < end; i++) {
if (nums[i] >= a && nums[i] < b) {
nums[ret++] = nums[i];
}
}
return ret;
}
static float fastLineLen(final float x0, final float y0,
final float x1, final float y1)
{
final float dx = x1 - x0;
final float dy = y1 - y0;
// use manhattan norm:
return Math.abs(dx) + Math.abs(dy);
}
static float linelen(final float x0, final float y0,
final float x1, final float y1)
{
final float dx = x1 - x0;
final float dy = y1 - y0;
return (float) Math.sqrt(dx * dx + dy * dy);
}
static float fastQuadLen(final float x0, final float y0,
final float x1, final float y1,
final float x2, final float y2)
{
final float dx1 = x1 - x0;
final float dx2 = x2 - x1;
final float dy1 = y1 - y0;
final float dy2 = y2 - y1;
// use manhattan norm:
return Math.abs(dx1) + Math.abs(dx2)
+ Math.abs(dy1) + Math.abs(dy2);
}
static float quadlen(final float x0, final float y0,
final float x1, final float y1,
final float x2, final float y2)
{
return (linelen(x0, y0, x1, y1)
+ linelen(x1, y1, x2, y2)
+ linelen(x0, y0, x2, y2)) / 2.0f;
}
static float fastCurvelen(final float x0, final float y0,
final float x1, final float y1,
final float x2, final float y2,
final float x3, final float y3)
{
final float dx1 = x1 - x0;
final float dx2 = x2 - x1;
final float dx3 = x3 - x2;
final float dy1 = y1 - y0;
final float dy2 = y2 - y1;
final float dy3 = y3 - y2;
// use manhattan norm:
return Math.abs(dx1) + Math.abs(dx2) + Math.abs(dx3)
+ Math.abs(dy1) + Math.abs(dy2) + Math.abs(dy3);
}
static float curvelen(final float x0, final float y0,
final float x1, final float y1,
final float x2, final float y2,
final float x3, final float y3)
{
return (linelen(x0, y0, x1, y1)
+ linelen(x1, y1, x2, y2)
+ linelen(x2, y2, x3, y3)
+ linelen(x0, y0, x3, y3)) / 2.0f;
}
// finds values of t where the curve in pts should be subdivided in order
// to get good offset curves a distance of w away from the middle curve.
// Stores the points in ts, and returns how many of them there were.
static int findSubdivPoints(final Curve c, final float[] pts,
final float[] ts, final int type,
final float w2)
{
final float x12 = pts[2] - pts[0];
final float y12 = pts[3] - pts[1];
// if the curve is already parallel to either axis we gain nothing
// from rotating it.
if ((y12 != 0.0f) && (x12 != 0.0f)) {
// we rotate it so that the first vector in the control polygon is
// parallel to the x-axis. This will ensure that rotated quarter
// circles won't be subdivided.
final float hypot = (float)Math.sqrt(x12 * x12 + y12 * y12);
final float cos = x12 / hypot;
final float sin = y12 / hypot;
final float x1 = cos * pts[0] + sin * pts[1];
final float y1 = cos * pts[1] - sin * pts[0];
final float x2 = cos * pts[2] + sin * pts[3];
final float y2 = cos * pts[3] - sin * pts[2];
final float x3 = cos * pts[4] + sin * pts[5];
final float y3 = cos * pts[5] - sin * pts[4];
switch(type) {
case 8:
final float x4 = cos * pts[6] + sin * pts[7];
final float y4 = cos * pts[7] - sin * pts[6];
c.set(x1, y1, x2, y2, x3, y3, x4, y4);
break;
case 6:
c.set(x1, y1, x2, y2, x3, y3);
break;
default:
}
} else {
c.set(pts, type);
}
int ret = 0;
// we subdivide at values of t such that the remaining rotated
// curves are monotonic in x and y.
ret += c.dxRoots(ts, ret);
ret += c.dyRoots(ts, ret);
// subdivide at inflection points.
if (type == 8) {
// quadratic curves can't have inflection points
ret += c.infPoints(ts, ret);
}
// now we must subdivide at points where one of the offset curves will have
// a cusp. This happens at ts where the radius of curvature is equal to w.
ret += c.rootsOfROCMinusW(ts, ret, w2, 0.0001f);
ret = filterOutNotInAB(ts, 0, ret, 0.0001f, 0.9999f);
isort(ts, ret);
return ret;
}
// finds values of t where the curve in pts should be subdivided in order
// to get intersections with the given clip rectangle.
// Stores the points in ts, and returns how many of them there were.
static int findClipPoints(final Curve curve, final float[] pts,
final float[] ts, final int type,
final int outCodeOR,
final float[] clipRect)
{
curve.set(pts, type);
// clip rectangle (ymin, ymax, xmin, xmax)
int ret = 0;
if ((outCodeOR & OUTCODE_LEFT) != 0) {
ret += curve.xPoints(ts, ret, clipRect[2]);
}
if ((outCodeOR & OUTCODE_RIGHT) != 0) {
ret += curve.xPoints(ts, ret, clipRect[3]);
}
if ((outCodeOR & OUTCODE_TOP) != 0) {
ret += curve.yPoints(ts, ret, clipRect[0]);
}
if ((outCodeOR & OUTCODE_BOTTOM) != 0) {
ret += curve.yPoints(ts, ret, clipRect[1]);
}
isort(ts, ret);
return ret;
}
static void subdivide(final float[] src,
final float[] left, final float[] right,
final int type)
{
switch(type) {
case 8:
subdivideCubic(src, left, right);
return;
case 6:
subdivideQuad(src, left, right);
return;
default:
throw new InternalError("Unsupported curve type");
}
}
static void isort(final float[] a, final int len) {
for (int i = 1, j; i < len; i++) {
final float ai = a[i];
j = i - 1;
for (; j >= 0 && a[j] > ai; j--) {
a[j + 1] = a[j];
}
a[j + 1] = ai;
}
}
// Most of these are copied from classes in java.awt.geom because we need
// both single and double precision variants of these functions, and Line2D,
// CubicCurve2D, QuadCurve2D don't provide them.
/**
* Subdivides the cubic curve specified by the coordinates
* stored in the <code>src</code> array at indices <code>srcoff</code>
* through (<code>srcoff</code> + 7) and stores the
* resulting two subdivided curves into the two result arrays at the
* corresponding indices.
* Either or both of the <code>left</code> and <code>right</code>
* arrays may be <code>null</code> or a reference to the same array
* as the <code>src</code> array.
* Note that the last point in the first subdivided curve is the
* same as the first point in the second subdivided curve. Thus,
* it is possible to pass the same array for <code>left</code>
* and <code>right</code> and to use offsets, such as <code>rightoff</code>
* equals (<code>leftoff</code> + 6), in order
* to avoid allocating extra storage for this common point.
* @param src the array holding the coordinates for the source curve
* @param left the array for storing the coordinates for the first
* half of the subdivided curve
* @param right the array for storing the coordinates for the second
* half of the subdivided curve
* @since 1.7
*/
static void subdivideCubic(final float[] src,
final float[] left,
final float[] right)
{
float x1 = src[0];
float y1 = src[1];
float cx1 = src[2];
float cy1 = src[3];
float cx2 = src[4];
float cy2 = src[5];
float x2 = src[6];
float y2 = src[7];
left[0] = x1;
left[1] = y1;
right[6] = x2;
right[7] = y2;
x1 = (x1 + cx1) / 2.0f;
y1 = (y1 + cy1) / 2.0f;
x2 = (x2 + cx2) / 2.0f;
y2 = (y2 + cy2) / 2.0f;
float cx = (cx1 + cx2) / 2.0f;
float cy = (cy1 + cy2) / 2.0f;
cx1 = (x1 + cx) / 2.0f;
cy1 = (y1 + cy) / 2.0f;
cx2 = (x2 + cx) / 2.0f;
cy2 = (y2 + cy) / 2.0f;
cx = (cx1 + cx2) / 2.0f;
cy = (cy1 + cy2) / 2.0f;
left[2] = x1;
left[3] = y1;
left[4] = cx1;
left[5] = cy1;
left[6] = cx;
left[7] = cy;
right[0] = cx;
right[1] = cy;
right[2] = cx2;
right[3] = cy2;
right[4] = x2;
right[5] = y2;
}
static void subdivideCubicAt(final float t,
final float[] src, final int offS,
final float[] pts, final int offL, final int offR)
{
float x1 = src[offS ];
float y1 = src[offS + 1];
float cx1 = src[offS + 2];
float cy1 = src[offS + 3];
float cx2 = src[offS + 4];
float cy2 = src[offS + 5];
float x2 = src[offS + 6];
float y2 = src[offS + 7];
pts[offL ] = x1;
pts[offL + 1] = y1;
pts[offR + 6] = x2;
pts[offR + 7] = y2;
x1 = x1 + t * (cx1 - x1);
y1 = y1 + t * (cy1 - y1);
x2 = cx2 + t * (x2 - cx2);
y2 = cy2 + t * (y2 - cy2);
float cx = cx1 + t * (cx2 - cx1);
float cy = cy1 + t * (cy2 - cy1);
cx1 = x1 + t * (cx - x1);
cy1 = y1 + t * (cy - y1);
cx2 = cx + t * (x2 - cx);
cy2 = cy + t * (y2 - cy);
cx = cx1 + t * (cx2 - cx1);
cy = cy1 + t * (cy2 - cy1);
pts[offL + 2] = x1;
pts[offL + 3] = y1;
pts[offL + 4] = cx1;
pts[offL + 5] = cy1;
pts[offL + 6] = cx;
pts[offL + 7] = cy;
pts[offR ] = cx;
pts[offR + 1] = cy;
pts[offR + 2] = cx2;
pts[offR + 3] = cy2;
pts[offR + 4] = x2;
pts[offR + 5] = y2;
}
static void subdivideQuad(final float[] src,
final float[] left,
final float[] right)
{
float x1 = src[0];
float y1 = src[1];
float cx = src[2];
float cy = src[3];
float x2 = src[4];
float y2 = src[5];
left[0] = x1;
left[1] = y1;
right[4] = x2;
right[5] = y2;
x1 = (x1 + cx) / 2.0f;
y1 = (y1 + cy) / 2.0f;
x2 = (x2 + cx) / 2.0f;
y2 = (y2 + cy) / 2.0f;
cx = (x1 + x2) / 2.0f;
cy = (y1 + y2) / 2.0f;
left[2] = x1;
left[3] = y1;
left[4] = cx;
left[5] = cy;
right[0] = cx;
right[1] = cy;
right[2] = x2;
right[3] = y2;
}
static void subdivideQuadAt(final float t,
final float[] src, final int offS,
final float[] pts, final int offL, final int offR)
{
float x1 = src[offS ];
float y1 = src[offS + 1];
float cx = src[offS + 2];
float cy = src[offS + 3];
float x2 = src[offS + 4];
float y2 = src[offS + 5];
pts[offL ] = x1;
pts[offL + 1] = y1;
pts[offR + 4] = x2;
pts[offR + 5] = y2;
x1 = x1 + t * (cx - x1);
y1 = y1 + t * (cy - y1);
x2 = cx + t * (x2 - cx);
y2 = cy + t * (y2 - cy);
cx = x1 + t * (x2 - x1);
cy = y1 + t * (y2 - y1);
pts[offL + 2] = x1;
pts[offL + 3] = y1;
pts[offL + 4] = cx;
pts[offL + 5] = cy;
pts[offR ] = cx;
pts[offR + 1] = cy;
pts[offR + 2] = x2;
pts[offR + 3] = y2;
}
static void subdivideLineAt(final float t,
final float[] src, final int offS,
final float[] pts, final int offL, final int offR)
{
float x1 = src[offS ];
float y1 = src[offS + 1];
float x2 = src[offS + 2];
float y2 = src[offS + 3];
pts[offL ] = x1;
pts[offL + 1] = y1;
pts[offR + 2] = x2;
pts[offR + 3] = y2;
x1 = x1 + t * (x2 - x1);
y1 = y1 + t * (y2 - y1);
pts[offL + 2] = x1;
pts[offL + 3] = y1;
pts[offR ] = x1;
pts[offR + 1] = y1;
}
static void subdivideAt(final float t,
final float[] src, final int offS,
final float[] pts, final int offL, final int type)
{
// if instead of switch (perf + most probable cases first)
if (type == 8) {
subdivideCubicAt(t, src, offS, pts, offL, offL + type);
} else if (type == 4) {
subdivideLineAt(t, src, offS, pts, offL, offL + type);
} else {
subdivideQuadAt(t, src, offS, pts, offL, offL + type);
}
}
// From sun.java2d.loops.GeneralRenderer:
static int outcode(final float x, final float y,
final float[] clipRect)
{
int code;
if (y < clipRect[0]) {
code = OUTCODE_TOP;
} else if (y >= clipRect[1]) {
code = OUTCODE_BOTTOM;
} else {
code = 0;
}
if (x < clipRect[2]) {
code |= OUTCODE_LEFT;
} else if (x >= clipRect[3]) {
code |= OUTCODE_RIGHT;
}
return code;
}
// a stack of polynomial curves where each curve shares endpoints with
// adjacent ones.
static final class PolyStack {
private static final byte TYPE_LINETO = (byte) 0;
private static final byte TYPE_QUADTO = (byte) 1;
private static final byte TYPE_CUBICTO = (byte) 2;
// curves capacity = edges count (8192) = edges x 2 (coords)
private static final int INITIAL_CURVES_COUNT = INITIAL_EDGES_COUNT << 1;
// types capacity = edges count (4096)
private static final int INITIAL_TYPES_COUNT = INITIAL_EDGES_COUNT;
float[] curves;
int end;
byte[] curveTypes;
int numCurves;
// curves ref (dirty)
final FloatArrayCache.Reference curves_ref;
// curveTypes ref (dirty)
final ByteArrayCache.Reference curveTypes_ref;
// used marks (stats only)
int curveTypesUseMark;
int curvesUseMark;
private final StatLong stat_polystack_types;
private final StatLong stat_polystack_curves;
private final Histogram hist_polystack_curves;
private final StatLong stat_array_polystack_curves;
private final StatLong stat_array_polystack_curveTypes;
PolyStack(final RendererContext rdrCtx) {
this(rdrCtx, null, null, null, null, null);
}
PolyStack(final RendererContext rdrCtx,
final StatLong stat_polystack_types,
final StatLong stat_polystack_curves,
final Histogram hist_polystack_curves,
final StatLong stat_array_polystack_curves,
final StatLong stat_array_polystack_curveTypes)
{
curves_ref = rdrCtx.newDirtyFloatArrayRef(INITIAL_CURVES_COUNT); // 32K
curves = curves_ref.initial;
curveTypes_ref = rdrCtx.newDirtyByteArrayRef(INITIAL_TYPES_COUNT); // 4K
curveTypes = curveTypes_ref.initial;
numCurves = 0;
end = 0;
if (DO_STATS) {
curveTypesUseMark = 0;
curvesUseMark = 0;
}
this.stat_polystack_types = stat_polystack_types;
this.stat_polystack_curves = stat_polystack_curves;
this.hist_polystack_curves = hist_polystack_curves;
this.stat_array_polystack_curves = stat_array_polystack_curves;
this.stat_array_polystack_curveTypes = stat_array_polystack_curveTypes;
}
/**
* Disposes this PolyStack:
* clean up before reusing this instance
*/
void dispose() {
end = 0;
numCurves = 0;
if (DO_STATS) {
stat_polystack_types.add(curveTypesUseMark);
stat_polystack_curves.add(curvesUseMark);
hist_polystack_curves.add(curvesUseMark);
// reset marks
curveTypesUseMark = 0;
curvesUseMark = 0;
}
// Return arrays:
// curves and curveTypes are kept dirty
curves = curves_ref.putArray(curves);
curveTypes = curveTypes_ref.putArray(curveTypes);
}
private void ensureSpace(final int n) {
// use substraction to avoid integer overflow:
if (curves.length - end < n) {
if (DO_STATS) {
stat_array_polystack_curves.add(end + n);
}
curves = curves_ref.widenArray(curves, end, end + n);
}
if (curveTypes.length <= numCurves) {
if (DO_STATS) {
stat_array_polystack_curveTypes.add(numCurves + 1);
}
curveTypes = curveTypes_ref.widenArray(curveTypes,
numCurves,
numCurves + 1);
}
}
void pushCubic(float x0, float y0,
float x1, float y1,
float x2, float y2)
{
ensureSpace(6);
curveTypes[numCurves++] = TYPE_CUBICTO;
// we reverse the coordinate order to make popping easier
final float[] _curves = curves;
int e = end;
_curves[e++] = x2; _curves[e++] = y2;
_curves[e++] = x1; _curves[e++] = y1;
_curves[e++] = x0; _curves[e++] = y0;
end = e;
}
void pushQuad(float x0, float y0,
float x1, float y1)
{
ensureSpace(4);
curveTypes[numCurves++] = TYPE_QUADTO;
final float[] _curves = curves;
int e = end;
_curves[e++] = x1; _curves[e++] = y1;
_curves[e++] = x0; _curves[e++] = y0;
end = e;
}
void pushLine(float x, float y) {
ensureSpace(2);
curveTypes[numCurves++] = TYPE_LINETO;
curves[end++] = x; curves[end++] = y;
}
void pullAll(final PathConsumer2D io) {
final int nc = numCurves;
if (nc == 0) {
return;
}
if (DO_STATS) {
// update used marks:
if (numCurves > curveTypesUseMark) {
curveTypesUseMark = numCurves;
}
if (end > curvesUseMark) {
curvesUseMark = end;
}
}
final byte[] _curveTypes = curveTypes;
final float[] _curves = curves;
int e = 0;
for (int i = 0; i < nc; i++) {
switch(_curveTypes[i]) {
case TYPE_LINETO:
io.lineTo(_curves[e], _curves[e+1]);
e += 2;
continue;
case TYPE_CUBICTO:
io.curveTo(_curves[e], _curves[e+1],
_curves[e+2], _curves[e+3],
_curves[e+4], _curves[e+5]);
e += 6;
continue;
case TYPE_QUADTO:
io.quadTo(_curves[e], _curves[e+1],
_curves[e+2], _curves[e+3]);
e += 4;
continue;
default:
}
}
numCurves = 0;
end = 0;
}
void popAll(final PathConsumer2D io) {
int nc = numCurves;
if (nc == 0) {
return;
}
if (DO_STATS) {
// update used marks:
if (numCurves > curveTypesUseMark) {
curveTypesUseMark = numCurves;
}
if (end > curvesUseMark) {
curvesUseMark = end;
}
}
final byte[] _curveTypes = curveTypes;
final float[] _curves = curves;
int e = end;
while (nc != 0) {
switch(_curveTypes[--nc]) {
case TYPE_LINETO:
e -= 2;
io.lineTo(_curves[e], _curves[e+1]);
continue;
case TYPE_CUBICTO:
e -= 6;
io.curveTo(_curves[e], _curves[e+1],
_curves[e+2], _curves[e+3],
_curves[e+4], _curves[e+5]);
continue;
case TYPE_QUADTO:
e -= 4;
io.quadTo(_curves[e], _curves[e+1],
_curves[e+2], _curves[e+3]);
continue;
default:
}
}
numCurves = 0;
end = 0;
}
@Override
public String toString() {
String ret = "";
int nc = numCurves;
int last = end;
int len;
while (nc != 0) {
switch(curveTypes[--nc]) {
case TYPE_LINETO:
len = 2;
ret += "line: ";
break;
case TYPE_QUADTO:
len = 4;
ret += "quad: ";
break;
case TYPE_CUBICTO:
len = 6;
ret += "cubic: ";
break;
default:
len = 0;
}
last -= len;
ret += Arrays.toString(Arrays.copyOfRange(curves, last, last+len))
+ "\n";
}
return ret;
}
/**代码未完, 请加载全部代码(NowJava.com).**/
关注时代Java
关注时代Java